BRINGING YOU THE BEST CERAMIC COATING FOR ALUMINUM AND STAINLESS STEEL BOATS

Give your boat triple protection, protecting it from corrosion, rust and UV light!

SHOWBOAT HAS BEEN FEATURED IN THE FLORDIA SPORTSMAN!

– Click the Image Below To Read the Article –

Florida Sportsman

SB-230 STAINLESS STEEL & ALUMINUM METAL PROTECTION

  • Clear Polymer Ceramic Coating
  • Chemically Bonds To Metal
  • Reduces Maintenance
  • UV Protection

Our Services

Premium Quality Ceramic Coating for Tuna Towers, T-Tops, Outriggers and More!

Full Service Coating

Our trusted crew will go to any length to give you a comprehensive coating service. Available at any dock, marina or home, the service includes thorough cleaning and application of SB-230 to metal.

Company Training

Our one-on-one training will take just one day to complete but you will gather the know-how required for proper cleaning, preparation and application of SB-230, unexcelled ceramic coating for boats.

Product Sales

SB-230 is a first-rate ceramic coating for aluminum and stainless steel boats. Tell us what surface area you want to cover with the product and we’ll tell you how much of it you need: be it coating for aluminum boat ladders, rod holder coating or anything in between!

Outside Summer Kitchens

Outdoor kitchen ceramic coating is what your outside summer kitchen needs for protection against damage, rust, corrosion and UV light. Our outdoor barbeque ceramic coating will keep it safe for years to come!

Small Parts Coating

No challenge is too big for ShowBoat Custom Coating, Inc. and no part is too small! We can coat any part using a special technique that will ensure a flawless finish, from boat cleats coating to swim ladders boat protective coating!

Superior Quality: SB-230 – Clear Ceramic Coating for Boat Metal Protection

SB-230 is a clear polymer ceramic coating that chemically bonds to metal, ensuring that your boat or other structures made of metal are protected from harmful environmental factors. Do not allow yourself to neglect your boat to the extent that corrosion, rust and UV lights cause it lasting damage. What’s more, high-gloss finish SB-230 clear ceramic coating can restore your boat to its former glory. With its high efficiency and low-maintenance requirements, SB-230 is your boat’s first line of defense!

Ceramic Coating for Boats for Maximum Safety & Protection

ANTI-CORROSION

ANTI-CORROSION

ANTI-RUST

ANTI-RUST

REDUCED MAINTENANCE

REDUCED MAINTENANCE

UV PROTECTION

UV PROTECTION

guaranatee

SB-230 SAVES YOUR TIME AND ENERGY IN THE LONG RUN

The quality of SB-230 ceramic coating for aluminum and stainless steel boats is best illustrated by its high demand. Another reason for its popularity is its low-maintenance requirements. If we provide the coating service, all you need to do is to clean the metal using mild soap and water and dry it with a microfiber cloth once a month, steering clear of abrasives or harsh chemicals. If you purchased the product and applied it yourself, make sure to follow our detailed step-by-step instructions.

WHAT SETS SHOWBOAT APART FROM THE REST:

OUTSTANDING QUALITY PRODUCT

OUTSTANDING QUALITY PRODUCT

FULL SERVICE AVAILABLE NATIONWIDE

FULL SERVICE AVAILABLE NATIONWIDE

ATTENTION TO DETAIL

ATTENTION TO DETAIL

EXCELLENT CUSTOMER SUPPORT

EXCELLENT CUSTOMER SUPPORT

CHECK OUT WHAT OUR SATISFIED CUSTOMERS HAVE TO SAY ABOUT OUR SERVICES!

I took old beat up cleats and chocks and hatches. Filed, sanded and smoothed the aluminum. I then applied SB-305 (silver) via a small HVLP Jam Gun and the finished turned out perfect! Hatches look brand new as the same with cleats and chocks. Will use again if and when needed.
Thomas Wahl

Had all the metal on my 26fs Regulator done about a year ago and it looks like it was just polished yesterday.It would take me 5 hours or more to polish the metal and have to do it all over again in 6 months. Now soap water DONE……..
Mark Reuwer

The aluminum on my 89 Blackfin convertible was tired and required endless elbow grease to look presentable. When I switched to using your product, the results were amazing. Once I completed the formal cleaning process, your product was easy to install. The look now is great. I get lots of compliments on my 24 year old boat. I love your product!
D Nilson

We purchased your SB-230 at last years Fort Lauderdale boat show. My wife Pat and I followed your directions, cleaning and prepairing the metal. We then applied the coating,and our bright work looked like new again. We coated the tower, the outriggers, the bow rail, and rod holders. It was an amazing difference. Now one year later it still looks great. Ours is a older boat, 94 Grady-White. People ask me if we just had the tower put on, it looks that good. Your product made the difference. Thanks
Greg & Pat Moore

FIRST CLASS BOAT METAL PROTECTION COATING

Full Service Coating: Give Your Boat Tried and Tested Protection

Allow us to show you the spectacular effect this outstanding ceramic coating for boats is bound to have. Your boat will be revamped beyond recognition after our trusted and experienced mobile crew takes over. Using tried-and-true professional methods, our industry veterans will clean your boat swiftly and meticulously and apply SB-230 coating flawlessly.

We understand that, when it comes to their vessels, our customers are reluctant to leave anything to chance. They realize the job is best left to the pros and that is where ShowBoat Custom Coating, Inc. comes in. Because we share your passion, we are deeply committed to keeping your boat safe and increasing its lifespan. Whether you own a private boat or belong to the marine industry, our full service is exactly what your boat or yacht needs!

Company Training: Add Another Division to Your Company

If you are a current or prospective marine industry business owner or manager, reach out to us for a one-day company training. This one-on-one training will teach you, your employees or co-workers to prepare boats for application of SB-230. We’ll show you how to prepare metal, apply SB-230, troubleshoot problems and analyze costs. Learn from the best!

Expanding your range of services is always a sound business idea. Not only does learning the ropes take just one day, but the high demand for metal coating services is guaranteed to help your business thrive. This is especially true if you reach out to the best in the business to provide in-depth training and share their know-how and expertise with you, your co-workers and employees. No one can show you all the tricks of the trade as proficiently and quickly as our metal protection specialists!

Serving: Florida | Georgia | North Carolina | South Carolina | Virginia | Alabama | Mississippi | Louisiana | Texas | Southern California | and all other states by appointment