As a boat owner, you want to give your boat the full treatment and keep it safe from detrimental influences. ShowBoat Custom Coating, Inc. is here to offer you the all-in-one boat metal protection coating you have been looking for. SB-230 is a polymer ceramic coating that forms a strong bond with the metal on your boat. If you go for our Full Service option, our team will also perform the in-depth cleaning and preparation process before applying the coating to your boat.
SB-230 STAINLESS STEEL & ALUMINUM METAL PROTECTION
- Clear Polymer Ceramic Coating
- Chemically Bonds To Metal
- Reduces Maintenance
- UV Protection
SB-230: The Ultimate Solution for Aluminum & Metal Protection of Boats
Stainless Steel or Aluminum Metal Protection Boats Need
To ensure boat metal protection, coating is of essence. Whether it’s aluminum or stainless steel, the metal on your boat is susceptible to rust and corrosion. SB-230 keeps your boat safe from various types of corrosion:
- Atmospheric corrosion
- Stress corrosion
- Erosion corrosion
- Corrosion fatigue
- Poultice corrosion
- Pitting corrosion
- Cavitation corrosion
- Crevice corrosion
To top it all off, this clear ceramic coating adds to the aesthetic appeal of your boat as it comes with a high-gloss finish that will make the metal look as good as new for a long time to come. Whether you’re looking for durable ceramic coating for boat cleats, aluminum boat ladders protective coating or swim ladders boat protective coating, it’s SB-230 to the rescue!
Full Service That Keeps Your Boat Fully Protected
When it comes to boat maintenance, it is not easy to stay on top of things. But here at ShowBoat Custom Coating, Inc., we enable you to maximize the benefits of SB-230 boat metal protection coating through the Full Service application that we provide. We have what it takes to revamp the metal on your boat by performing a diligent cleaning and preparation process before the application itself. Do not leave anything to chance: put the pros in charge of revamping your boat.
SB-230 Boat Metal Protection Coating: Eliminate Risks & Save Time
Powerful and Beautiful: Aluminum & Metal Protection for Boats
At some point, the negative effects of sunlight, salt air and water on your boat begin to show. As inevitable as these may be, we have the answer that can put a stop to all that and make your boat as strong and healthy as ever. We are ready to rise to any challenge and counteract the damage. Owing to our in-depth approach to the application of SB-230, your boat will not only be powerful but also beautiful yet again.
HERE’S WHAT OUR CUSTOMERS HAVE TO SAY ABOUT OUR SERVICES!
After finding Dave at the Ft. Lauderdale boat show, I had him coat all of the metal on my 36 express fisherman. The boat is 16 years old and the aluminum tower and outriggers had cloudy areas and some minor pitting. I tried many of the products on the market and, while they produced some limited results in masking the cloudy finish to the aluminum, they all lasted for a very short time. Dave came to the boat with a team of 5 guys and worked their butts off for 4 days on the boat coating every exposed piece of metal on the boat. I can say the results exceeded my expectations. All cloudiness was removed and the metal shines like new. This process was done 18 months ago and maintenance now consists of a simple wash down after a day on the water. One note on deeply pitted or worn areas. This system will only coat over those areas and not restore them without having the area sanded down to remove the pitting, but ask Dave and he with fill you in. I scratched off some of the finish off one of my tower legs this year removing an outrigger and Dave was able to send me some product and walk me through recoating the scratch. I would highly recommend his system for new aluminum as well as weather metal. You won’t be disappointed.Dec 23, 2012
Had all the metal on my 26fs Regulator done about a year ago and it looks like it was just polished yesterday.It would take me 5 hours or more to polish the metal and have to do it all over again in 6 months. Now soap water DONE……..
I wish I had done it sooner. ThanksNov 13, 2013
The aluminum on my 89 Blackfin convertible was tired and required endless elbow grease to look presentable. When I switched to using your product, the results were amazing. Once I completed the formal cleaning process, your product was easy to install. The look now is great. I get lots of compliments on my 24 year old boat. I love your product!Nov 11, 2013
We purchased your SB-230 at last years Fort Lauderdale boat show. My wife Pat and I followed your directions, cleaning and prepairing the metal. We then applied the coating,and our bright work looked like new again. We coated the tower, the outriggers, the bow rail, and rod holders. It was an amazing difference. Now one year later it still looks great. Ours is a older boat, 94 Grady-White. People ask me if we just had the tower put on, it looks that good. Your product made the difference. ThanksNov 8, 2013
David and his employees are some of the hardest working tradesmen I have seen. They did great job renewing the tower pipes on my 1985, 52 Hatteras. Worth the cost.Nov 5, 2013
Peter did a great job on my 2001 25′ Seacraft.
All the metal, including my old riggers look brand new! It’s been almost a year and the shine is like day 1. We just wash it with gentle soap n’ water. Good investment- looks great and protects my boat’s value.Feb 17, 2013
I took old beat up cleats and chocks and hatches. Filed, sanded and smoothed the aluminum. I then applied SB-305 (silver) via a small HVLP Jam Gun and the finished turned out perfect! Hatches look brand new as the same with cleats and chocks. Will use again if and when needed.Dec 5, 2012