To get the most out of the outdoor cooking experience, you need your outdoor kitchen and barbeque to stay shipshape. ShowBoat Custom Coating, Inc. has the answer: SB-230, outdoor kitchen and BBQ ceramic coating that offers lasting protection by forming a powerful chemical bond with metal. We also offer a Full Service option: our team will show up at your home, thoroughly clean the metal on your outdoor kitchen or BBQ and apply the polymer coating.
SB-230 STAINLESS STEEL & ALUMINUM METAL PROTECTION
- Clear Polymer Ceramic Coating
- Chemically Bonds To Metal
- Reduces Maintenance
- UV Protection
SB-230: Durable Outdoor Kitchen & BBQ Ceramic Coating
Dependable Barbeque & Outdoor Kitchen Ceramic Coating
As much as you enjoy cooking and entertaining outdoors, the outdoor environment is not the ideal setting for your outdoor kitchen or barbeque area, especially if it’s rich in salt air. Contrary to popular belief, even stainless steel is not immune to rust and corrosion.
No matter how careful you are, the metal gets exposed to various effects that could cause it lasting damage. These include the following:
- Mechanical Abrasion
It is possible to safeguard your outdoor kitchen and barbeque area against these and other environmental factors. SB-230 gives you lasting BBQ and outdoor kitchen ceramic coating that secures complete protection you can rely on for many years to come.
Full Service Outdoor Kitchen & BBQ Ceramic Coating
There is a solid reason behind the high demand for full service outdoor barbeque ceramic coating application. Our customers choose Full Service over the DIY option because they don’t want to take their chances by applying the coating themselves and risk missing a spot. Despite our years of experience, we always act with deliberation so as to ensure the optimal end-results. After performing the comprehensive preparation process, we apply the BBQ and outdoor kitchen ceramic coating with high attention to detail.
SB-230 Allows You to Save Time & Check the Risks Off the List
Outdoor Kitchen & BBQ Ceramic Coating and Restoration
When it comes to the detrimental factors affecting the state of your outdoor kitchen and barbeque, you cannot afford to wait too long. As soon as you start to notice that various outdoor factors have started to take their inevitable toll, give us a call. Allow us to turn back time and give you back the chance to enjoy the outdoor cooking experience in the comfort of your own backyard for many carefree years to come.
HERE’S WHAT OUR CUSTOMERS HAVE TO SAY ABOUT OUR SERVICES!
After finding Dave at the Ft. Lauderdale boat show, I had him coat all of the metal on my 36 express fisherman. The boat is 16 years old and the aluminum tower and outriggers had cloudy areas and some minor pitting. I tried many of the products on the market and, while they produced some limited results in masking the cloudy finish to the aluminum, they all lasted for a very short time. Dave came to the boat with a team of 5 guys and worked their butts off for 4 days on the boat coating every exposed piece of metal on the boat. I can say the results exceeded my expectations. All cloudiness was removed and the metal shines like new. This process was done 18 months ago and maintenance now consists of a simple wash down after a day on the water. One note on deeply pitted or worn areas. This system will only coat over those areas and not restore them without having the area sanded down to remove the pitting, but ask Dave and he with fill you in. I scratched off some of the finish off one of my tower legs this year removing an outrigger and Dave was able to send me some product and walk me through recoating the scratch. I would highly recommend his system for new aluminum as well as weather metal. You won’t be disappointed.Dec 23, 2012
Had all the metal on my 26fs Regulator done about a year ago and it looks like it was just polished yesterday.It would take me 5 hours or more to polish the metal and have to do it all over again in 6 months. Now soap water DONE……..
I wish I had done it sooner. ThanksNov 13, 2013
The aluminum on my 89 Blackfin convertible was tired and required endless elbow grease to look presentable. When I switched to using your product, the results were amazing. Once I completed the formal cleaning process, your product was easy to install. The look now is great. I get lots of compliments on my 24 year old boat. I love your product!Nov 11, 2013
We purchased your SB-230 at last years Fort Lauderdale boat show. My wife Pat and I followed your directions, cleaning and prepairing the metal. We then applied the coating,and our bright work looked like new again. We coated the tower, the outriggers, the bow rail, and rod holders. It was an amazing difference. Now one year later it still looks great. Ours is a older boat, 94 Grady-White. People ask me if we just had the tower put on, it looks that good. Your product made the difference. ThanksNov 8, 2013
David and his employees are some of the hardest working tradesmen I have seen. They did great job renewing the tower pipes on my 1985, 52 Hatteras. Worth the cost.Nov 5, 2013
Peter did a great job on my 2001 25′ Seacraft.
All the metal, including my old riggers look brand new! It’s been almost a year and the shine is like day 1. We just wash it with gentle soap n’ water. Good investment- looks great and protects my boat’s value.Feb 17, 2013
I took old beat up cleats and chocks and hatches. Filed, sanded and smoothed the aluminum. I then applied SB-305 (silver) via a small HVLP Jam Gun and the finished turned out perfect! Hatches look brand new as the same with cleats and chocks. Will use again if and when needed.Dec 5, 2012